A Feather board without ambition is a Feather board without FeatherWings! This is the Adafruit 8×16 LED Matrix FeatherWing! This FeatherWing backpack makes it easy to combine and control two of our adorable mini 8×8 LED matrices with a FeatherWing driver board. Double them up for 128 total bright LEDs.
You will chirp with delight when you see how easy it is to make your very own 8×16 LED matrix display for any Feather. At 0.8″ square, the little 8×8 matrices have everything a big LED matrix has, but bite sized!
This one will work with any and all Feathers!
Normally, wiring up 8×16 matrices would require a breath-taking 24 GPIO pins, which is way too many pins. That’s where this lovely 16×8 LED matrix backpack PCB comes in. It contains a HT16K33 I2C LED matrix driver that does all the multiplexing work for you, and is controlled over the two I2C pins. It’s easy to use, has a portable library that runs on any of our Feathers to turn on/off each LED.
The 16×8 backpack is also great for making scrolling displays or small video displays. In our example, we set it up to display small bitmap emoticons but you can also display text that moves – kind of like a sign in front of a miniature car dealership.
Adafruit 8×16 LED Matrix FeatherWing kit comes with:
- A fully tested and assembled Adafruit 8×16 LED Matrix FeatherWing
- Two sixteen pin headers
A bit of soldering is required to attach the matrix onto the FeatherWing but its very easy to do and only takes about 5 minutes!